4 Wash water line hose couplings
The following hose coupling types are used to connect the hoses
to pumps and spray jets and/or as points of separation:
4.1 Windscreen and rear window washer
system
– Pull the two coupling sections apart (no securing device) to
loosen the connection.
– To secure the connection, push the two coupling sections to‐
gether, until you hear and feel them engage.
– To loosen the connection, rotate the lock ring -1- by 90°
-arrow- and pull off the hose connection.
– To secure the connection, push on the hose connection and
rotate the lock ring -1- -arrow- until it engages.
– To loosen the connection, pull up the lock ring -1- by approx.
1 mm -arrow- and pull off the hose connection.
– To secure the connection, push on the hose connection and
push in the lock ring -1- until it engages.
Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
174 Rep. Gr.92 - Windscreen wash/wipe system