– Release locking lugs -arrows- and remove interior locking
switch from the installation frame.
Installing:
Install in reverse order of removal.
3.4 Components - front door locks
The following components (depending on equipment) are inte‐
grated into the driver side door lock:
♦ Driver door contact switch -F2-
♦ Driver side central locking lock unit -F220-
♦ Driver door central locking motor -V56-
♦ Driver door central locking deadlock function motor -V161-
The following components (depending on equipment) are inte‐
grated into the passenger side door lock:
♦ Front passenger door contact switch -F3-
♦ Front passenger side central locking lock unit -F221-
♦ Front passenger seat central locking motor -V57-
♦ Front passenger door central locking deadlock function motor
-V162-
Note
In the event of repair, the complete component must be renewed.
In the event of component defects - front door locks:
– Replace relevant door lock ⇒ General Body Repairs, Exterior;
Rep. Gr. 57 ; Front door; Removing and installing door lock .
3.5 Removing and installing switch module
for driver side window lift
Special tools and workshop equipment required
♦ Removal wedge -VAS 3409-
Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
250 Rep. Gr.96 - Lights, lamps, switches - inside