2 Lights and switches in dash panel
2.1 Removing and installing light switch -
E1-
The following components are integrated into the light switch -
E1- :
♦ Fog light switch -E7-
♦ Rear fog light switch -E18-
♦ Light switch illumination bulb -L9-
Removing:
– Switch off the ignition and all electrical consumers.
– Turn grip of light switch to position “0”.
– Push in grip of light switch -1- and turn it to the right slightly
-2-.
– Hold rotary part in this position and pull lighting switch (using
rotary part) out of dash panel -3-.
– Disconnect connector -arrow-.
Installing:
– Fit connector to light switch.
– Hold light switch and press rotary position indicator of light
switch firmly inwards -1- and turn slightly to right -2-.
– Hold grip in this position and insert light switch in dash panel
-3-.
– Turn rotary knob to “0” release and engage switch.
Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
240 Rep. Gr.96 - Lights, lamps, switches - inside