3 Lights and switches in front doors
3.1 Removing and installing window regula‐
tor switch in front passenger door -
E107-
Note
The window regulator switch in front passenger door -E107- fea‐
tures a button illumination bulb -L76- , which must not be replaced
individually.
Removing:
– Switch off the ignition and all electrical consumers.
– Remove lever shell, upper part out of the closing lever ⇒ Gen‐
eral body repairs, interior; Rep. Gr. 70 ; Removing and instal‐
ling door trim; Front door trim, front passenger side .
– Disconnect connector -arrow-.
– Release locking lugs -arrows- and remove switch from the in‐
stallation frame.
Installing:
Install in reverse order of removal.
3.2 Removing and installing switch module
for driver side mirror adjustment
The following components (depending on equipment) are inte‐
grated into the switch module for the driver side mirror adjustment:
♦ Mirror adjustment switch -E43-
♦ Mirror adjustment reversing switch -E48-
♦ Exterior mirror heater button -E231-
♦ Mirror fold-in feature system switch -E263-
♦ Mirror adjustment switch illumination bulb -L78-
Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
248 Rep. Gr.96 - Lights, lamps, switches - inside