Manual R06-2016 13 / 172
ROTARY INDEXING TABLE CONTROLLER
EF2...B
SAFETY | 2.1 Basic safety instructions
2SAFETY
2.1 Basic safety instructions
The controller corresponds to the state of the art and the applicable stipulations of the VDE. It provides a high level
of safety.
This safety can only be achieved during actual operation, however, when all associated necessary measures have
been performed. The operator is obliged to plan these measures and to inspect their execution.
Only suitably qualified personnel may install, commission, and maintain the machine.
This personnel must take into account the information provided in the technical customer documentation for the pro-
duct, and be familiar with and observe the specified danger and warning notices.
2.1.1 Operator‘s obligation to exercise diligence
The operator must ensure that
• The controller and the machine controlled by it are only used as intended.
• The controller and the machine controlled by it are only operated in perfect working condition and the mechanical
and electrical safety equipment are present.
• this manual and all other applicable documentation is maintained at all times in legible condition and is accessi-
ble at the iinstallation site of the machine. Ensure that all personnel who must carry out tasks on the machine
have access the manuals at all times..
• all safety instructions and warnings affixed to the product are not removed and must remain legible.
• national accident prevention guidelines and company-internal guidelines are complied with.
• VDE regulations are complied with.
• the EMC legislation is complied with during installation.
To Next Page
Loading...
Need help?
General
