Manual R06-2016150 / 172
ROTARY INDEXING TABLE CONTROLLER EF2...B
STANDARDS AND APPROVALS | 12.3 cULus approval
12.3 cULus approval
SOUTH KOREA
For sellers or other users, please keep in mind that this device is an A-grade electroma-
gnetic wave device. This device is intended to be used in areas other than at home.
The EMC limit values to be observed for Korea correspond to the limit values of the
EMC product standard for variable-speed electric drives EN 61800-3 of category C2 or
the limit value class A, Group 1 to EN55011.
By implementing appropriate additional measures, the limit values according to category
C2 or limit value class A, Group 1, are observed.
For this purpose, additional measures, such as the use of an additional RFI suppression
filter (EMC filter) may be necessary.
In addition, measures for EMC-compliant configuration of the system are described in
this Manual and/or the Configuration Manual "EMC Installation Guideline".
Please note that it is ultimately always the label on the device that provides the relevant
information about the compliance with standards.
AUSTRALIA
D410-2 DP and D410-2 DP/PN meet the requirements of the
AS61800-3.
Listed component mark for United States and the Canada Under-
writers Laboratories (UL) according to Standard UL 508, File
E164110, File E115352, File E85972.
To Next Page
Loading...
Need help?
General
