Radio Communications 4 - 39
Variable PIN Code
Parameter # 608 (SSI # F1h 60h)
When switching to Cradle Host mode, scan Static PIN Code below to avoid entering the PIN code manually. The
PIN stored in memory is used. Scan the Variable PIN Code below to manually enter a PIN code with each
connection.
The default PIN code is the user-programmed PIN set and stored above. Typically, however, HID connections
require entering a Variable PIN Code. If, when attempting connection, the application presents a text box that
includes a PIN, scan the Variable PIN Code bar code, then re-attempt connection. When you hear a beep
indicating the digital scanner is waiting for an alphanumeric entry, enter the provided variable PIN using the
Alphanumeric Bar Codes on page H-1, then scan End of Message in the Advanced Data Formatting Guide. if the
code is less than 16 characters. The digital scanner discards the variable PIN code after connection.
Set and Store PIN Code
*Static PIN Code
(0)
Variable PIN Code
(1)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
