12 - 2 DS8178 Digital Scanner Product Reference Guide
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
Symbology Parameter Defaults
Table 12-1 lists the defaults for all symbology parameters. To change the default values, scan the appropriate bar
codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, see Default Parameters on page 5-5.
NOTE See Appendix A, Standard Parameter Defaults for all user preferences, hosts, and miscellaneous default
parameters.
Table 12-1 Symbology Parameter Defaults
Parameter
Parameter
Number
SSI Number Default
Page
Number
Enable/Disable All Code Types
12-7
1D Symbologies
UPC/EAN
UPC-A 1 01h Enable
12-8
UPC-E 2 02h Enable
12-8
UPC-E1 12 0Ch Disable
12-9
EAN-8/JAN 8 4 04h Enable
12-9
EAN-13/JAN 13 3 03h Enable
12-10
Bookland EAN 83 53h Disable
12-10
Decode UPC/EAN/JAN Supplementals
(2 and 5 digits)
16 10h Ignore
12-12
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
579
580
F1h 43h
F1h 44h
000
12-14
UPC/EAN/JAN Supplemental Redundancy 80 50h 10
12-14
Decode UPC/EAN/JAN Supplemental
AIM ID
672 F1h A0h Combined
12-15
UPC Reduced Quiet Zone 1289 F8h 05h 09h Disable
12-16
Transmit UPC-A Check Digit 40 28h Enable
12-16
Transmit UPC-E Check Digit 41 29h Enable
12-16
Transmit UPC-E1 Check Digit 42 2Ah Enable
12-17
To Next Page
Loading...
Need help?
General
Weight and Dimensions
