Symbologies 12 - 65
GS1 DataBar Security Level
Parameter # 1706 (SSI # F8h 06h AAh)
The decoder offers four levels of decode security for GS1 Databar (GS1 Databar 14, GS1 Databar Limited, GS1
Databar Expanded) bar codes.
•
Security Level 0: This setting allows the digital scanner to operate in its most aggressive state, while
providing sufficient security in decoding most in-spec bar codes.
•
Security Level 1: This setting eliminates most misdecodes while maintaining reasonable aggressiveness
(default).
•
Security Level 2: This setting allows greater bar code security requirements if Security Level 1 fails to
eliminate misdecodes.
•
Security Level 3: This setting applies the highest safety requirements. Select if Security Level 2 was applied
and misdecodes still occur.
Security Level 0
(0)
* Security Level 1
(1)
Security Level 2
(2)
Security Level 3
(3)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
