Zebra DS8178 Product Reference Guide

SSI Interface 8 - 11
SSI Host Parameters
Select SSI Host
To select SSI as the host interface, scan the following bar code.
Host Character Time-out 239 EFh 200 msec 8-18
Multipacket Option 334 F0h 4Eh Option 1 8-19
Interpacket Delay 335 F0h 4Fh 0 ms 8-20
Event Reporting
Decode Event 256 F0h 00h Disable 8-21
Boot Up Event 258 F0h 02h Disable 8-22
Parameter Event 259 F0h 03h Disable 8-22
Table 8-3 SSI Default Table (Continued)
Parameter
Parameter
Number
SSI
Number
Default
Page
Number
NOTE SSI interprets Prefix, Suffix1, and Suffix2 values listed in Table I-1 on page I-1 differently than other
interfaces. SSI does not recognize key categories, only the 3-digit decimal value. The default value of
7013 is interpreted as CR only.
SSI Host

Zebra DS8178 Specifications

General

Product color	Black
Housing material	-
International Protection (IP) code	IP42
Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	Photo diode
Scanner type	1D/2D
Tilt reading angle	0 - 360 °
Pitch reading angle	0 - 60 °
Optical sensor resolution	1280 pixels
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
PC connection	RS-232/USB
Wireless range	100 m
Bluetooth version	4.0
Standard interfaces	USB, RS-232, Bluetooth
Connectivity technology	Wired & Wireless
Battery life	83 h
Battery capacity	2500 mAh
Power source type	Battery

Weight and Dimensions

Depth	107 mm
Width	66 mm
Height	168 mm
Weight	235.3 g