Zebra ZD410 User Manual

USB Host Port and Link-OS Usage Examples
102
Exercise 1: Copy Files to a USB Flash Drive and Perform USB Mirror
1. On your USB Flash Drive, create the following:
• a folder called Zebra
• in that folder, three sub folders:
• appl
• commands
• files
2. In the /appl folder, place a copy of the latest firmware for your printer.
Note • Some functions may not work properly if there are underscores in a file name. Use periods instead.
2. In the /files folder, place the following file:
• File 1: ZEBRA.BMP
3. In the /commands folder, place the following files:
• File 2: SAMPLELABEL.TXT
• File 3: LOGO.ZPL
4. Insert the USB Flash drive into a USB host port on the front of your printer.
5. Observe the user interface and wait. The following should happen:
• If the firmware on the USB Flash drive is different than what is on the printer, the firmware
downloads to the printer. The printer then restarts and prints a printer configuration label. (If there
is no firmware on the USB Flash drive or if the firmware version is the same, the printer skips this
action.)
• The printer downloads the files in the /files folder and briefly shows the names of the files that
are downloading on the display.
• The printer executes any files in the /commands folder.
• The printer restarts and then displays the message
MIRROR PROCESSING FINISHED.
6. Remove the USB Flash drive from the printer.

Zebra ZD410 Specifications

General

Wi-Fi	Yes
Ethernet LAN	No
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	4.1
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Print technology	Direct thermal
Maximum resolution	300 x 300 DPI
Maximum print height	991 mm
Maximum printing width	56 mm
Flash memory	512 MB
Internal memory	256 MB
Built-in barcodes	1D, 2D
Page description languages	EPL, EPL2, XML, ZPL, ZPL II
Display	-
Product color	Gray
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	5 - 41 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Core diameter	12.7 mm
Media thickness	0.08 - 0.305 mm
Maximum roll diameter	127 mm
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	220 mm
Width	115 mm
Height	151 mm
Weight	1000 g