Zebra ZD410 User Manual

Maintenance
117
Other Printer Maintenance
There are no user level maintenance procedures beyond those detailed in this section. See the
Troubleshooting for more information on diagnosing printer and print problems.
RTC Battery
The Real Time Clock (RTC) is available with printers that have factory installed networking options and are
paired with Zebra Print Touch feature (which is identified by Print Touch logo on the front of the printer).
The clock’s battery is rated to provide approximately ten (10) years of service and is not user replaceable.
See a Zebra authorized service technician to replace the battery. See the warranty for your printer for more
details at the Zebra Web site:
www.zebra.com/warranty
Caution • The printer has a three volt lithium battery. You can discern a low or flat battery if the printer provides a
consistently delayed date stamp. Battery replacement must be performed by a qualified service technician. Only use a
Zebra approved replacement battery.
Important • Recycle batteries according to local your guidelines and regulations. Wrap the battery when disposing
(or storing) to avoid a short circuit.
Caution • DO NOT short circuit the battery. Short circuiting the battery may result in heat generation, fire or bursting.
Caution • DO NOT heat, disassemble or dispose of battery in fire.
Fuses
There are no replaceable fuses in these printers or power supplies.

Zebra ZD410 Specifications

General

Wi-Fi	Yes
Ethernet LAN	No
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	4.1
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Print technology	Direct thermal
Maximum resolution	300 x 300 DPI
Maximum print height	991 mm
Maximum printing width	56 mm
Flash memory	512 MB
Internal memory	256 MB
Built-in barcodes	1D, 2D
Page description languages	EPL, EPL2, XML, ZPL, ZPL II
Display	-
Product color	Gray
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	5 - 41 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Core diameter	12.7 mm
Media thickness	0.08 - 0.305 mm
Maximum roll diameter	127 mm
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	220 mm
Width	115 mm
Height	151 mm
Weight	1000 g