ABB REC 561 User Manual

I/O system configuration
ABB Network Partner AB
1MRK 580 190-XEN
Page 4 - 17
Version 1.0-00
2.4 Input/output module The input/output module (IOM) has 8 inputs and 12 outputs. The func-
tionality of the oscillating input blocking that is available on BIM and on
the supervised outputs on BOM are not available on this module.
Fig. 3 Terminal diagram of the input/output module (IOM)
2.5 mA input module The mA input module (MIM) has 6 inputs for mA signals. The POSI-
TION input is located on the first MIM channel for each MIM module. If
the configuration is incorrect, the ERROR output is set on the:
• First MIM channel (MI11, MI21-MI61) of that MIM
• InputErr outputs on all MIM channels of that MIM
ERROR
BI2
BI3
BI4
BI5
BI6
IOxx
BI1
POSITION
BI7
BI8
BO1
BO2
BO3
BO5
BO4
BO6
BO7
BO8
BO9
BO11
BO10
BO12
BINAME1
BINAME2
BINAME4
BINAME3
BINAME5
BINAME6
BINAME7
BINAME8
BONAME2
BONAME1
BONAME3
BONAME4
BONAME5
BONAME7
BONAME6
BONAME8
BONAME9
BONAME10
BONAME11
BONAME12
I/O-module
(X80190-3)

ABB REC 561 Specifications

General

Brand	ABB
Model	REC 561
Category	Touch terminals
Language	English