ABB Network Partner AB
Local man machine
communication
Version 1.0-00
1MRK 580 156-XEN
Page 3 - 34
All this information is available under the different parts of a menu tree
(See Menu tree - Appendix, (1MRK 580 158-XEN)).
In addition, a recalculation of the distance to fault is possible when the
Fault locator option is included in the terminal. For more details, see the
description of the Fault locator function, in Fault locator
(1MRK 580 138-XEN).
6.9 Saving the settings in
a setting group
You set different parameters within one of the four setting groups in a
separate editing area. Select the E button under the Setting submenu to
enter this area for a desired setting group. See Fig. 16.
Then you change different parameters for different functions. To exit the
editing area, select the C button until a dialogue window for a command
with confirmation appears.
If you select the C button too many times, the terminal changes to the dia-
logue window with confirmation. Here, you must confirm the cancellation
of the previous setting activities by selecting the E button. Otherwise,
select C again and the menu tree returns to the first dialogue window.
The terminal prompts you to save the changed settings in the same setting
group that you started with (setting group n in Fig. 16). You can confirm
the save or request that the settings be saved in another setting group,
which is available within the current menu window.
Use the up or down arrows to select the desired setting group.
To Next Page
Loading...
Need help?
General
