2 Digital Multimeter Operation
Making Measurements
36 U3606A User’s and Service Guide
Making the connections
Connect the test leads as shown below:
Figure 2-4 Terminal connections for 4-wire resistance measurements
• The U3606A will automatically select a suitable range for 4-wire
low-resistance measurements by default (autoranging). To manually
select a range, see “Selecting a Range” on page 54 for more
information.
• The U3606A resolution is set to 5½ digits by default. To change the
resolution, see “Setting the Resolution” on page 55 for more
information.
To Next Page
Loading...
Need help?
General
