Characteristics and Specifications 8
DC Power Supply Specifications
U3606A User’s and Service Guide 255
Sweep specifications
Table 8 - 10 Scan output specifications
Scan Constant voltage Constant current
RangeS1S2S1S2
Amplitude
[1]
[1] Scan output starts at 0 (V or A) by default.
0 V to 31.500 V 0 V to 8.4000 V 0 A to 1.0500 A 0 A to 3.1500 A
Step 1 step to 100 steps 1 step to 100 steps
Dwelling time 1 s to 99 s 1 s to 99 s
Table 8 - 11 Ramp output specifications
Ramp Constant voltage Constant current
RangeS1S2S1S2
Amplitude
[1]
[1] Ramp output starts at 0 (V or A) by default.
0 V to 31.500 V 0 V to 8.4000 V 0 A to 1.0500 A 0 A to 3.1500 A
Step 1 step to 10000 steps 1 step to 10000 steps
Dwelling time 300 ms (typical) per step 300 ms (typical) per step
To Next Page
Loading...
Need help?
General
