Agilent Technologies U3606A User Manual

2 Digital Multimeter Operation
Triggering the Multimeter
72 U3606A User’s and Service Guide
Remote interface operation:
• The TRIGger:SOURce BUS command selects the bus trigger source.
• The MEASure? command overwrites the bus trigger and triggers the
U3606A and returns a measurement.
• The READ? command does not overwrite the bus trigger, and if selected,
generates an error. It will only trigger the instrument and return a
measurement when the IMMEdiate trigger is selected.
• The INITiate command only initiates the measurement and needs a
trigger (*TRG command) to make the actual measurement.
Refer to the U3606A Programmer’s Reference for the syntax and complete
descriptions for these commands.

Agilent Technologies U3606A Specifications

General

Brand	Agilent Technologies
Model	U3606A
Category	Multimeter
Language	English