2. Getting started
2.2 Un packing the projector
What you need to do?
Upon delivery, your projector is pac ked into a carton box upon a wooden/plastic pallet and sec ured with banding and fastening clips.
Furthermore, to provide protection during transportation, the projector is surrounded by foam. Once the projector has arrived at
the installation site, it needs to be removed from its carton box and wooden/plastic pallet in a safe man ner without damaging the
projector.
How to unpack your projector?
1. Loosen the banding (reference 1 image 2-1) by pulling the free end of the banding loop in the clip.
1
Image 2-1
2. Lift up the carton box (reference 2 image 2-2) as a w hole an
d rem ove it away from the projector pac kage.
3. Take out the small box (reference 3 image 2-2) between the polystyrene foam on top of the projector. This box contains the
product docum entation (manu als e tc.).
4. Remove the polystyrene foam (reference 4 image 2-2) from the top of the projector.
2
3
4
Image 2-2
5. Open the plastic bag and lift the projector out of its packaging, using the handles provided in the projec tor b ase.
18
R5906847 DP2K SLP SERIES 02/06/2017
To Next Page
Loading...
Need help?
General
