Barco DP2K SLP Series User Manual

7. ICMP
7.15 Removing a H DD from the ICM P
In case the ICMP has to be returned to factory (e .g. for repair) the non d efective HD Ds should be removed an d
kept.
How to remove a HDD ?
1. Switch off the projector.
2. Moving the latch towards the left.
Image 7-15
3. Push the unloc k b utton to open the handle.
Image 7-16
4. Pull the HDD out of its slot.
Image 7-17
To install the HDD see p roced ure "Installing a H D D into the ICMP", page 80.
R5906847 DP2K SLP SERIES 02/06/2017 79

Barco DP2K SLP Series Specifications

General

Brand	Barco
Model	DP2K SLP Series
Category	Projector
Language	English