3. Installation process
3.2 Software upgrade
How to upgrade the software
1. Switch on the projector. The projector can now be switched on. P lace the ON/OFF switch of the projector in the ”I” position. As a
result the projector starts to initialize. The status lights of the projector lights up GREEN once the projector is initialized. In case
the status lights up RED may indicate a tamper event during transport. If so, contact Barco customer service.
2. Download and install the latest version of Communicator. The program can be downloaded for free from Barco’s website, (URL:
h
ttp://www.barco.com). Click o n myBarco and login to get access to secured information. Registration is necessary.
If you are not yet registered, click on New to myBarco and follow the instructions. W ith the created login and password, it is
possible to login where you can download the software.
3. Download the latest firmware from B arco’s webs ite in the same way as for Communicator.
4. Start Communica tor and mak e a connection with the projector. For more information, consult the Comm unicator user guide.
5. Login as service technician and click on tab Maintenance and select Software update.
6. Click on Launch DC update companion.
7. Click Next, accept the license agreem ent and continue following the wizard.
R5906847 DP2K SLP SERIES 02/06/2017 25
To Next Page
Loading...
Need help?
General
