MY23P0a -52_1.0_11.10.2022
187
Operation
6.17.2 Frame battery
6.17.2.1 Inserting the battery
The key is inserted in the lock.
The lock is unlocked.
1 Place the battery into the lower mount with the
contacts facing the front (1).
Figure 172: Inserting the PowerPack battery
2 Flip the battery upwards so that the battery is
held by the retainer guard (2).
.
Figure 173: Closing the PowerPack battery upwards
3 Keep the lock open with the key.
4 Push the battery upwards (3).
The battery can be heard locking into place.
5 Check battery to ensure it is firmly in place on
all sides.
6 Lock the battery with the battery key;
otherwise, the battery may fall out of the mount
when you open the see (4).
7 Remove the battery key from the battery lock.
8 Check the battery to ensure it is firmly in place
before each ride.
6.17.2.2 Removing the battery
1 Open battery lock with battery key (1).
The battery is released and falls into the
retainer guard (2).
2 Hold the battery in your hand from below. Use
the other hand to push on the retainer guard
from above (3).
The battery is released and falls into the
hand (4).
3 Remove the battery from the frame.
4 Remove the battery key from the battery lock.
To Next Page
Loading...
Need help?
General
