Breas Vivo 45 User Manual

7 Cleaning and Maintenance
WARNING!
The Vivo 45 should be subjected to maintenance, service and control and any applica-
ble upgrades, in accordance with Breas service instructions.
The Vivo 45 shall only be repaired or modified in accordance with Breas service man-
uals, technical bulletins, and any special service instructions, by service technicians
that have been authorised after Breas Vivo 45 service training.
Do not under any circumstances attempt to service or repair the ventilator yourself.
If you do so, the manufacturer will no longer be responsible for the performance and
safety of the ventilator.
Deviation from these service instructions may lead to risk of personal injury!
The patient-connected parts and the filter must be cleaned and replaced regularly to
ensure correct function of the ventilator. All replaced parts must be disposed of in
accordance with local environmental regulations regarding the disposal of used equip-
ment and waste.
7.1 Cleaning the Vivo 45
WARNING!
To avoid electrical shock, disconnect the power supply to the ventilator before clean-
ing. Do not immerse the ventilator into any fluids.
CAUTION!
Always be careful when cleaning to ensure that you do not damage any equipment.
Fluid must not be allowed to enter the ventilator.
Never apply any liquids directly on the ventilator by spraying, splashing or pouring.
Use a moistened lint-free cloth when cleaning.
Do not use an excessive amount of liquid when cleaning the ventilator.
Do not autoclave the ventilator.
136 Cleaning and Maintenance
Vivo 45 User manual
Doc. 006149 D-3

Breas Vivo 45 Specifications

General

Brand	Breas
Model	Vivo 45
Category	Medical Equipment
Language	English