5.6.6 Click-in Battery
The click-in battery is intended as a power source during transportation, or if the pri-
mary AC power source fails.
The click-in battery can be replaced during treatment, provided that the internal battery
is charged.
Connect the Click-in Battery
1 Release the side cover by pressing
the button under the handle.
2 Open and remove the side panel.
3 Insert the click-in battery. Make
sure the latch at the bottom of the
click-in compartment is engaged.
76 How to Use the Vivo 45
Vivo 45 User manual
Doc. 006149 D-3
To Next Page
Loading...
Need help?
General
