3 Connect the power supply’s power
cord to the mains supply.
To isolate the Vivo 45 from the mains supply, disconnect the power supply.
4.4 Connecting the Patient Circuit
WARNING!
Read 2.4 Usage of Patient Circuit, page 21 carefully to make sure all conditions are con-
sidered and met.
Connect the Patient Circuit
1 Inspect the circuit for damages.
2 Connect the patient circuit to the
patient air outlet on the ventilator.
3 If having a heated patient circuit,
connect the heated wire electrical
plug to the socket on the ventilator.
Preparing the Vivo 45 for Use 41
Doc. 006149 D-3
Vivo 45 User manual
To Next Page
Loading...
Need help?
General
