EasyManuals Logo

Breas Vivo 45 User Manual

Breas Vivo 45
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
Ingress Protection:
IP22
Solid particle protection: Hazardous parts are protected from touch by fingers and by
objects greater than 12 mm.
Liquid ingress protection: The protection withstands dripping water less than 15 degrees
from vertical.
The ingress protection has been tested by water drips equivalent to 3mm rain/minute
for 10 minutes (2.5 minutes for each tilting direction).
8.2.7 Other
Patient Circuit Leakage
Recommended leakage: 20 to 50 l/min at 10 cmH
2
O (leakage circuit)
Minimum leakage: 12 l/min at 4 cmH
2
O (leakage circuit)
Oxygen Inlet
Oxygen inlet port: Maximum flow: 15 l/min (medical oxygen). Oxygen coupling is
type CPC PMCD181032.
Start-up Time
Start-up from unpowered state: about 20 seconds.
Sound Power Level
Sound level at 10 cmH
2
O in CPAP mode: Less than 30 dB(A). Measured at 1 m.
Alarm sound level : Adjustable 5080 dB(A), Measured at 1m. Tolerance: ± 5 dB(A).
Miscellaneous
Maximum flow: > 300 l/min
Maximum flow at 20 mbar: > 150 l/min
Maximum limited pressure during single fault condition: 80 cmH2O (PCV, PSV)
30 cmH2O (CPAP)
Breathing resistance under single-fault: <6 cmH2O at 30 l/min, <6 cmH2O at 60
l/min
Vivo 45 Dimensions
W × H × D: 216 × 159 × 152 mm
Weight: 2.4 kg
Patient air outlet: 22 mm male, conical standard connector
Technical Specifications 151
Doc. 006149 D-3
Vivo 45 User manual

Table of Contents

Other manuals for Breas Vivo 45

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Breas Vivo 45 and is the answer not in the manual?

Breas Vivo 45 Specifications

General IconGeneral
BrandBreas
ModelVivo 45
CategoryMedical Equipment
LanguageEnglish

Related product manuals