Breas Vivo 45 User Manual

CAUTION!
Do not cover the air inlets or outlets.
5.7.11 Using the Vivo 45 with the Trolley
Intended Use
The intended use of the trolley system is to allow patient mobility while receiving venti-
lator treatment. The trolley shall only be used in indoor, hospital environment. The trol-
ley system consists of a trolley base and a mounting bracket.
This section describes how to use the Vivo 45 and a trolley with mounting bracket.
Mount and dismount the Vivo 45 as shown in the picture:
1
2
The bottom plate is mounted to the trolley using two screws.
Be careful when handling the trolley with the ventilator mounted, in order to avoid any
risk of the trolley falling. The trolley can be tipped 10° and return to vertical position,
when loaded in accordance with the weight specifications below.
WARNING!
The maximum total weight of the trolley and added accessories is 37 kg (82 lbs).
(Trolley base weight = 12 kg (26 lbs), maximum externally added load = 25 kg (55
lbs).)
How to Use the Vivo 45 91
Doc. 006149 D-3
Vivo 45 User manual

Breas Vivo 45 Specifications

General

Brand	Breas
Model	Vivo 45
Category	Medical Equipment
Language	English