EasyManuals Logo
Home>Canon>Printer>imagePROGRAF iPF680

Canon imagePROGRAF iPF680 User Manual

Canon imagePROGRAF iPF680
650 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #373 background imageLoading...
Page #373 background image
4
Insert the Holder Stopper from the left in the Roll Holder
as shown. Holding it at the position shown (b), push it
firmly in until the flange (a) of the Holder Stopper touches
the roll. Lock the Holder Stopper lever (c) by pushing it
down toward the shaft side.
Loading Rolls in the Printer
Loading Rolls in the Printer
Follow these steps to load rolls in the printer.
Note
Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If these areas
are dirty, we recommend cleaning them in advance. (See "Cleaning Inside the Top Cover.") P.564
1
Press the Load button.
2
Press or to select "Load Roll Paper", and then press the OK button.
Note
If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press or to select Yes, and then press the OK button. Remove the paper and go to the next step.
iPF680
Loading Rolls in the Printer
User's Guide
Handling and Use of Paper Handling rolls
373

Table of Contents

Other manuals for Canon imagePROGRAF iPF680

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF iPF680 and is the answer not in the manual?

Canon imagePROGRAF iPF680 Specifications

General IconGeneral
ColorYes
Printing colorsBlack, Cyan, Magenta, Matte black, Yellow
Print technologyInkjet
Maximum resolution2400 x 1200 DPI
Page description languagesGARO, HP-GL/2, HP-RTL
Media thickness0.07 - 0.8 mm
Maximum print size-
Maximum roll length18 m
Media width (rolls)254 - 609.6 mm
Media width (sheets)203.2 - 609.6 mm
Maximum roll diameter150 mm
Paper tray media typesCoated paper, Cut sheet, Plain paper, Roll
ISO A-series sizes (A0...A9)A1, A2, A3
ISO B-series sizes (B0...B9)B2, B4
CertificationRoHS
Product colorBlack, Grey
Sound pressure level (printing)47 dB
USB connectorUSB Type-A
USB 2.0 ports quantity1
Ethernet LAN data rates10/100/1000 Base-T/TX Mbit/s
Ethernet interface typeGigabit Ethernet
Compliance industry standardsIEEE 802.3ab, IEEE 802.3u, IEEE 802.3
Power consumption (standby)0.5 W
Power consumption (typical)140 W
Storage temperature (T-T)15 - 30 °C
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth757 mm
Width997 mm
Height507 mm

Related product manuals