Canon imagePROGRAF iPF680 User Manual

The printer stops during a print job
The printer stops during a print job
An error message is shown on the Display Screen ................................................................................................. 590
The printer ejects blank, unprinted paper ................................................................................................................... 590
The printer stops when printing a HP-GL/2 job (the carriage stops moving) ............................................. 602
An error message is shown on the Display Screen
An error message is shown on the Display Screen
Cause Corrective Action
The last portion of roll paper was used during a print job, and paper could not be
advanced because the trailing edge is taped to the roll.
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.") ➔P.378
(See "Removing the Roll Holder from Rolls.") ➔ P.381
(See "Loading and Printing on Rolls.") ➔ P.19
The printer ejects blank, unprinted paper
The printer ejects blank, unprinted paper
Cause Corrective Action
The leading edge of the roll paper was cut to
straighten it.
The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value
other than Off in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.") ➔ P.389
The Printhead nozzles are clogged. Print a test pattern to check the nozzles and make sure the Printhead is in good condi-
tion for printing.
(See "Checking for Nozzle Clogging.") ➔ P.549
A print job was received from an incompatible
printer driver.
Use the correct imagePROGRAF printer driver for the printer and try printing again.
The printer has received print data that in-
cludes HP RTL commands when Auto Rotate
is On in the Control Panel menu.
In the Control Panel, set Auto Rotate to Off and print again.
(See "Menu Settings.") ➔P.456
The printer is damaged. Contact your Canon dealer for assistance.
An error message is shown on the Display Screen iPF680
User's Guide
Troubleshooting The printer stops during a print job
590

Canon imagePROGRAF iPF680 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO, HP-GL/2, HP-RTL
Media thickness	0.07 - 0.8 mm
Maximum print size	-
Maximum roll length	18 m
Media width (rolls)	254 - 609.6 mm
Media width (sheets)	203.2 - 609.6 mm
Maximum roll diameter	150 mm
Paper tray media types	Coated paper, Cut sheet, Plain paper, Roll
ISO A-series sizes (A0...A9)	A1, A2, A3
ISO B-series sizes (B0...B9)	B2, B4
Certification	RoHS
Product color	Black, Grey
Sound pressure level (printing)	47 dB
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet LAN data rates	10/100/1000 Base-T/TX Mbit/s
Ethernet interface type	Gigabit Ethernet
Compliance industry standards	IEEE 802.3ab, IEEE 802.3u, IEEE 802.3
Power consumption (standby)	0.5 W
Power consumption (typical)	140 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	757 mm
Width	997 mm
Height	507 mm