Important
• Borderless printing is not possible if details such as crop marks and margins are included as data on the periphery of
the original.
• If the length of the image to print is short, then since the roll paper is fed out to a prescribed length before cutting in
order to prevent cutting problems and ejection problems, the trailing edge of the roll paper might not be printed bor-
derless.
•
These features cannot be used in combination with borderless printing: special page layouts, centering originals, and
printing cut lines on rolls.
• If Fit Paper Size or Print Image with Actual Size (Windows only) is selected while performing borderless printing,
Rotate Page 90 degrees (Conserve Paper) cannot be selected. Note that if borderless printing is possible, then
even if the original is rotated 90 degrees, it will be printed by automatically rotating the page by 90 degrees.
Choose the method of borderless printing that suits the original, as desired.
•
Scale to fit Roll Paper Width
Enlarge or reduce the original as a whole to match the roll paper width.
Note
• You can combine this function with rotating pages 90 degrees before printing so that the original width (relative to
portrait orientation) matches the roll paper width in borderless printing.
For instructions on borderless printing of photos, images, and other documents to match the roll paper width, refer
to the following topics, as appropriate for your computer and operating system.
•
Borderless Printing by Resizing Originals to Fit the Roll Width (Windows) ➔ P.91
•
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS) ➔ P.93
Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)
Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)
This topic describes how to enlarge originals before borderless printing to match the roll width, based on the following
example.
Important
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the
edges. If you require higher image quality, select No from the Automatic Cutting list in the Roll Paper Options
dialog box. In this case, the paper can be printed without borders on the left and right sides only. Once printed and
cut, please cut the upper and lower bands with scissors.
•
Document: Any type
•
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
•
Paper: Roll
•
Paper type: Canon Heavyweight Coated Paper
•
Roll paper width: 10 inches (254.0 mm)
iPF680
Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)
User's Guide
Enhanced Printing Options Borderless Printing
91
To Next Page
Loading...
Need help?
General
Weight and Dimensions
