Canon imagePROGRAF iPF680 User Manual

Other Maintenance
Other Maintenance
Preparing to Transfer the Printer .................................................................................................................................... 568
Reinstalling the Printer ......................................................................................................................................................... 571
Updating the Firmware ........................................................................................................................................................ 575
Preparing to Transfer the Printer
Preparing to Transfer the Printer
To protect the internal parts in transit, always follow these steps before transferring the printer to a new location.
Refer to the Setup Guide for details on packing the printer and installing it after transfer.
Important
• Avoid tilting the printer excessively in transit. This may cause ink in the printer to leak and cause stains.
Note
• When you execute prepare to transfer, ink is drawn into the Maintenance Cartridge. Depending on the amount of free
space in the mounted Maintenance Cartridge, you may need to replace it with a new one at this time.
Note that replacement is not required if there is 80% or more free space. (See "Checking the Remaining Maintenance
Cartridge Capacity.") ➔P.562
• Depending on the state of the printer, part replacement may be necessary when preparing to transfer the printer (that
is, when you execute the printer menu item to prepare for transfer).
Remove paper
1 Remove the paper.
• Rolls (See "Removing the Roll from the Printer.") ➔ P.378
• Sheets (See "Removing Sheets.") ➔ P.397
Access the Prep.MovePrinter menu
1 If a message instructing you to replace the Maintenance Cartridge is displayed on the Display Screen, replace
the Maintenance Cartridge.
(See "Replacing the Maintenance Cartridge.") ➔ P.558
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Prep.MovePrinter, and then press the OK button.
Preparing to Transfer the Printer iPF680
User's Guide
Maintenance and Consumables Other Maintenance
568

Canon imagePROGRAF iPF680 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO, HP-GL/2, HP-RTL
Media thickness	0.07 - 0.8 mm
Maximum print size	-
Maximum roll length	18 m
Media width (rolls)	254 - 609.6 mm
Media width (sheets)	203.2 - 609.6 mm
Maximum roll diameter	150 mm
Paper tray media types	Coated paper, Cut sheet, Plain paper, Roll
ISO A-series sizes (A0...A9)	A1, A2, A3
ISO B-series sizes (B0...B9)	B2, B4
Certification	RoHS
Product color	Black, Grey
Sound pressure level (printing)	47 dB
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet LAN data rates	10/100/1000 Base-T/TX Mbit/s
Ethernet interface type	Gigabit Ethernet
Compliance industry standards	IEEE 802.3ab, IEEE 802.3u, IEEE 802.3
Power consumption (standby)	0.5 W
Power consumption (typical)	140 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	757 mm
Width	997 mm
Height	507 mm