Other problems
Other problems
The Ink Tank Cover has become detached from the printer .............................................................................. 603
The printer does not go on ................................................................................................................................................ 603
If the Printer Makes a Strange Sound ...........................................................................................................................603
Messages advising to check the maintenance cartridge are not cleared ..................................................... 604
The printer consumes a lot of ink ................................................................................................................................... 604
Ink Level Detection ................................................................................................................................................................ 604
The Ink Tank Cover has become detached from the printer
The Ink Tank Cover has become detached from the printer
Cause Corrective Action
The Ink Tank Cover became detached from the printer because too much
force was applied to the Ink Tank Cover.
Attach the Ink Tank Cover to the printer.
(See "Attach the Ink Tank Cover to the printer.") ➔ P.547
The printer does not go on
The printer does not go on
Cause Corrective Action
The printer is unplugged. Plug the power cord into the outlet, and then turn on the printer.
The specified voltage is not supplied. Check the voltage of the outlet and breaker.
(See "Specifications.") ➔P.630
If the Printer Makes a Strange Sound
If the Printer Makes a Strange Sound
Cause Corrective Action
The printer
makes a sound
during opera-
tion.
The following sounds do not indicate a problem with the printer.
•
There is a sound of suction from the Platen
To prevent paper from rising, paper is held against the Platen by suction from Vacuum holes under it.
•
There is a sound when a different size of paper is used and when the Carriage goes from side to side
When paper of a different size is used, a valve is automatically activated to switch the area for paper suction, which
may make a sound. This mechanism prevents suction from Vacuum holes where there is no paper.
In addition, ink is ejected in sync with the movement of the Carriage back and forth to ensure optimal ink flow. At
this time, the valve automatically switches the area for paper suction, which may make a sound.
•
Roll paper makes a fluttering sound during printing
There may be a fluttering sound when large paper is advanced.
•
If you suddenly hear the tone for cleaning operations
At regular intervals, for printer maintenance, cleaning operations will begin automatically, even if the printer is in
Sleep mode.
•
If you suddenly hear the tone for ink agitation
At regular intervals, to ensure optimal printing quality, the ink is agitated automatically, even if the printer is in Sleep
mode.
The ink is also agitated automatically under the following conditions. Note that other operations are not possible
while "Agitating..." is displayed on the control panel.
•
After the printer is turned on
In other cases, contact your Canon dealer.
iPF680
The Ink Tank Cover has become detached from the printer
User's Guide
Troubleshooting Other problems
603
To Next Page
Loading...
Need help?
General
Weight and Dimensions
