Cisco Catalyst 9500 User Manual

PurposeCommand or Action
Example:
Device(config)# ip http client
proxy-server 198.51.100.10 port 3128
Exits global configuration mode and returns
to privileged EXEC mode.
exit
Example:
Step 18
Device(config)# exit
(Optional) Saves your entries in the
configuration file.
copy running-config startup-config
Example:
Step 19
Device# copy running-config
startup-config
Configuringthe CallHomeServiceforCiscoSmartSoftwareManager On-Prem
For information about Cisco Smart Software Manager On-Prem (formerly known as Cisco Smart Software
Manager satellite), see https://www.cisco.com/c/en/us/buy/smart-accounts/software-manager-satellite.html.
To configure the Call Home service for the Cisco Smart Software Manager On-Prem (formerly known as
Cisco Smart Software Manager satellite), perform this procedure:
Procedure
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Enter your password if prompted.
Device> enable
Enters global configuration mode.configure terminal
Example:
Step 2
Device# configure terminal
Enters Call Home configuration mode.call-home
Example:
Step 3
Device(config)# call-home
By default, the CiscoTAC-1 profile is inactive.
To use this profile with the Call Home service,
you must enable the profile.
profile CiscoTAC-1
Example:
Device(config-call-home)# profile
CiscoTAC-1
Step 4
Disable the default destination address.no destination address http url
Example:
Step 5
Device(config-call-home-profile)# no
destination address http
https://tools.cisco.com/its/service/oddce/services/DDCEService
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
103
Configuring Smart Licensing
Configuring the Call Home Service for Cisco Smart Software Manager On-Prem

Cisco Catalyst 9500 Specifications

General

Brand	Cisco
Model	Catalyst 9500
Category	Switch
Language	English