Cisco Catalyst 9500 User Manual

Device# copy source: tftp:
Device# copy crashinfo:/tracelogs/IOSRP_R0-0.bin_0.14239.20151101234827.gz tftp:
Address or name of remote host []? 2.2.2.2
Destination filename [IOSRP_R0-0.bin_0.14239.20151101234827.gz]?
It is important to clear the generated report or archive files off the switch in order to have flash space available
for tracelog and other purposes.
Note
Monitoring Conditional Debugging
The table shown below lists the various commands that can be used to monitor conditional debugging.
PurposeCommand
Displays the current conditions set.show platform condition
Displays the current debug conditions set.show debug
Displays logs merged from the latest tracefile.show platform software trace filter-binary
Displays historical logs of merged tracefiles on the
system.
request platform software trace filter-binary
Configuration Examples for Conditional Debugging
The following is an output example of the show platform condition command.
Device# show platform condition
Conditional Debug Global State: Stop
Conditions Direction
----------------------------------------------------------------------------------------------|---------
MAC Address 0024.D7C7.0054 N/A
Feature Condition Type Value
-----------------------|-----------------------|--------------------------------
Device#
The following is an output example of the show debug command.
Device# show debug
IOSXE Conditional Debug Configs:
Conditional Debug Global State: Start
Conditions Direction
----------------------------------------------------------------------------------------------|---------
MAC Address 0024.D7C7.0054 N/A
Feature Condition Type Value
-----------------------|-----------------------|--------------------------------
Packet Infra debugs:
Ip Address Port
------------------------------------------------------|----------
Device#
The following is a sample of the debug platform condition stop command.
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
308
Conditional Debug and Radioactive Tracing
Monitoring Conditional Debugging

Cisco Catalyst 9500 Specifications

General

Brand	Cisco
Model	Catalyst 9500
Category	Switch
Language	English