EasyManuals Logo
Home>Cisco>Switch>Catalyst 9500

Cisco Catalyst 9500 User Manual

Cisco Catalyst 9500
360 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #220 background imageLoading...
Page #220 background image
PurposeCommand or Action
Device# copy running-config
startup-config
Monitoring and Maintaining Online Diagnostics
You can display the online diagnostic tests that are configured for a device or a device stack and check the
test results by using the privileged EXEC show commands in this table:
Table 13: Commands for Diagnostic Test Configuration and Results
PurposeCommand
Displays the online diagnostics configured for a
switch.
The switch [number | all] parameter is supported
only on stacking switches.
show diagnostic content switch [number | all]
The below command applies to the C9500-12Q,
C9500-16X, C9500-24Q, C9500-40X models of the
Cisco Catalyst 9500 Series Switches.
show diagnostic content
Displays the diagnostic tests that are running
currently. .
show diagnostic status
Displays the online diagnostics test results.
The switch [number | all] parameter is supported
only on stacking switches.
show diagnostic result switch [number | all] [detail
| test {name | test-id | test-id-range | all} [detail]]
Displays the online diagnostics test results.
The switch [number | all] parameter is supported
only on stacking switches.
show diagnostic switch [number | all] [detail]
The below command applies to the C9500-12Q,
C9500-16X, C9500-24Q, C9500-40X models of the
Cisco Catalyst 9500 Series Switches.
show diagnostic detail]
Displays the online diagnostics test schedule.
The switch [number | all] parameter is supported
only on stacking switches.
show diagnostic schedule [number | all]
Displays the POST results. (The output is the same
as the show post command output.)
show diagnostic post
The below command applies to the C9500-12Q,
C9500-16X, C9500-24Q, C9500-40X models of the
Cisco Catalyst 9500 Series Switches.
show post
Displays diagnostic events such as error, information,
or warning based on the test result.
show diagnostic events {event-type | module}
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
204
Configuring Online Diagnostics
Monitoring and Maintaining Online Diagnostics

Table of Contents

Other manuals for Cisco Catalyst 9500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 9500 and is the answer not in the manual?

Cisco Catalyst 9500 Specifications

General IconGeneral
BrandCisco
ModelCatalyst 9500
CategorySwitch
LanguageEnglish

Related product manuals