Cisco Catalyst 9500 User Manual

• To copy the OBFL data to the local network or a specific file system, use the copy onboard switch
switch-number url url-destination privileged EXEC command.
This does not apply to the C9500-12Q, C9500-16X, C9500-24Q, C9500-40X
models of the Cisco Catalyst 9500 Series Switches.
Note
• To disable OBFL, use the no hw-switch switch [switch-number] logging onboard [message level]
global configuration command.
The following applies to the C9500-12Q, C9500-16X, C9500-24Q, C9500-40X models of the Cisco
Catalyst 9500 Series Switches. To disable OBFL, use the no hw-module slot [module-number] logging
onboard {application-name } global configuration command.
• To clear all the OBFL data in the flash memory except for the uptime and CLI command information,
use the clear onboard switch switch-number privileged EXEC command.
The following applies to the C9500-12Q, C9500-16X, C9500-24Q, C9500-40X models of the Cisco
Catalyst 9500 Series Switches. To disable OBFL, use the no hw-module slot [module-number] logging
onboard {application-name } global configuration command.
To clear all the OBFL data in the flash memory except for the uptime, use the clear logging onboard
RP active {application} privileged EXEC command.
• In a switch stack, you can enable OBFL on a standalone switch or on all stack members by using the
hw-switch switch [switch-number] logging onboard [messagelevel level] global configuration command.
• The following does not apply to the C9500-12Q, C9500-16X, C9500-24Q, C9500-40X models of the
Cisco Catalyst 9500 Series Switches. To disable OBFL, use the no hw-module slot [module-number]
logging onboard {application-name } global configuration command.
You can enable or disable OBFL on a member switch from the active switch.
For more information about the commands in this section, see the command reference for this release.
Verifying Troubleshooting of the Software Configuration
Displaying OBFL Information
Table 18: Commands for Displaying OBFL Information - Cisco Catalyst 9500 Series Switches - High Performance
PurposeCommand
Displays the OBFL CLI commands that were
entered on a module.
show logging onboard RP active clilog [ continuous | detail
| summary ]
Device# show logging onboard RP active clilog
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
335
Troubleshooting the Software Configuration
Verifying Troubleshooting of the Software Configuration

Cisco Catalyst 9500 Specifications

General

Brand	Cisco
Model	Catalyst 9500
Category	Switch
Language	English