Cisco Catalyst 9500 User Manual

PurposeCommand or Action
Device# configure terminal
(Optional) Specifies the remote username.ip ftp username username
Example:
Step 3
Device(config)# ip ftp username Admin01
(Optional) Specifies the remote password.ip ftp password password
Example:
Step 4
Device(config)# ip ftp password
adminpassword
(Optional) Exits configuration mode. This step
is required only if you override the default
remote username (see Steps 3 and 4).
end
Example:
Device(config)# end
Step 5
Copies the configuration file from a network
server to the flash memory device using FTP.
copy ftp: [[//location]/directory ]/bundle_name
flash:
Example:
Step 6
Device>copy
ftp:/cat9k_iosxe.16.11.01.SPA.bin flash:
What to Do Next
After you have issued the copy EXEC command, you may be prompted for additional information or for
confirmation of the action. The prompt displayed depends on how much information you provide in the copy
command and the current setting of the file prompt global configuration command.
Copying a Configuration File from an RCP Server to Flash Memory Devices
To copy a configuration file from an RCP server to a flash memory device, complete the tasks in this section:
Procedure
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
• Enter your password if prompted.
Device> enable
(Optional) Enters global configuration mode.
This step is required only if you override the
configure terminal
Example:
Step 2
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
234
Managing Configuration Files
What to Do Next

Cisco Catalyst 9500 Specifications

General

Brand	Cisco
Model	Catalyst 9500
Category	Switch
Language	English