Cisco Catalyst 9500 User Manual

Device# show diagnostic bootup level
Current bootup diagnostic level: minimal
Device#
Additional References for Online Diagnostics
Related Documents
Document TitleRelated Topic
Command Reference (Catalyst 9500 Series
Switches)
For complete syntax and usage information for the
commands used in this chapter.
Feature Information for Configuring Online Diagnostics
This table provides release and related information for features explained in this module.
These features are available on all releases subsequent to the one they were introduced in, unless noted
otherwise.
Feature InformationFeatureRelease
With online diagnostics, you can test and verify the
hardware functionality of the device while the
device is connected to a live network.
Support for this feature was introduced only on the
C9500-12Q, C9500-16X, C9500-24Q, C9500-40X
models of the Cisco Catalyst 9500 Series Switches.
Online DiagnosticsCisco IOS XE Everest 16.5.1a
Support for this feature was introduced only on the
C9500-32C, C9500-32QC, C9500-48Y4C, and
C9500-24Y4C models of the Cisco Catalyst 9500
Series Switches.
Online DiagnosticsCisco IOS XE Fuji 16.8.1a
Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn.
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
207
Configuring Online Diagnostics
Additional References for Online Diagnostics

Cisco Catalyst 9500 Specifications

General

Brand	Cisco
Model	Catalyst 9500
Category	Switch
Language	English