Cisco Catalyst 9500 User Manual

PurposeCommand or Action
Enables the AAA access control system.aaa authentication login {default | list-name}
method1 [ method2... ]
Step 4
Example:
Device(config)# aaa authentication login
default group tacacs+
Establishes a username-based authentication
system.
username name [privilege level] password
encryption-type encrypted-password
Step 5
Example:
You can omit this step if a
network-based authentication
mechanism, such as TACACS+
or RADIUS, has been configured.
Note
Device(config)# username superuser
privilege 2 password 0 superpassword
Enables SCP server-side functionality.ip scp server enable
Example:
Step 6
Device(config)# ip scp server enable
Exits global configuration mode and returns to
privileged EXEC mode.
exit
Example:
Step 7
Device(config)# exit
(Optional) Troubleshoots SCP authentication
problems.
debug ip scp
Example:
Step 8
Device# debug ip scp
Enabling Secure Copy on the SSH Server
The following task shows how to configure the server-side functionality for SCP. This task shows a typical
configuration that allows a device to securely copy files from a remote workstation.
Procedure
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Enter your password, if prompted.
Device> enable
Enters global configuration mode.configure terminal
Example:
Step 2
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
247
Secure Copy
Enabling Secure Copy on the SSH Server

Cisco Catalyst 9500 Specifications

General

Brand	Cisco
Model	Catalyst 9500
Category	Switch
Language	English