Cisco Catalyst 9500 User Manual

Monitoring Smart Licensing Configuration
Use the following commands in privileged EXEC mode to monitor smart licensing configuration.
Table 7: Commands to Monitor Smart Licensing Configuration
PurposeCommand
Displays the compliance status of smart licensing.
The following is the list of possible statuses:
• Enabled: Indicates that smart licensing is
enabled.
• Waiting: Indicates the initial state after your
device has made a license entitlement request.
The device establishes communication with
Cisco and successfully registers itself with the
CSSM.
• Registered: Indicates that your device is able to
communicate with the CSSM, and is authorized
to initiate requests for license entitlements.
• Authorized: Indicates that your device is in
Compliance status and is authorized to use the
requested type and count of licenses. The
Authorization status has a lifetime of 90 days.
At the end of 30 days, the device will send a new
entitlement authorization request to the CSSM
to renew the authorization.
• Out Of Compliance: Indicates that one or more
of your licenses are out of compliance. You must
buy additional licenses.
• Eval Mode: You must register the device with
the CSSM within 90 days (of device usage).
Otherwise, your device's evaluation period will
expire.
• Evaluation Period Expired: At the end of 90 days,
if your device has not registered, the device
enters Evaluation Expired mode.
show license status
Displays all the entitlements in use. Additionally, it
shows the associated licensing certificates, compliance
status, UDI, and other details.
show license all
Displays the detailed debug output.show tech-support license
Displays the license usage information.show license usage
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
112
Configuring Smart Licensing
Monitoring Smart Licensing Configuration

Cisco Catalyst 9500 Specifications

General

Brand	Cisco
Model	Catalyst 9500
Category	Switch
Language	English