Cisco Catalyst 9500 User Manual

PurposeCommand or Action
Commits the activation changes to be persistent
across reloads. The commit can be done after
install commit
Example:
Step 4
activation when the system is up, or after the
Device# install commit
first reload. If a package is activated, but not
committed, it remains active after the first
reload, but not after the second reload.
Returns the device to the previous installation
state.
install rollback to {base | committed | id
commit-ID}
Example:
Step 5
Device# install rollback to committed
Deactivates an active package and updates the
package status.
install deactivate file flash: filename
Example:
Step 6
Device# install deactivate file
flash:cat9k_iosxe.BLD_SMU_20180302_085005_
TWIG_LATEST_20180306_013805.3.SSA.smu.bin
Verifies if the specified SMU is inactive and if
it is, deletes it from the file system. The inactive
install remove {file flash: filename | inactive}
Example:
Step 7
option deletes all the inactive packages from
the file system.
Device# install remove file
flash:cat9k_iosxe.BLD_SMU_20180302_085005_
TWIG_LATEST_20180306_013805.3.SSA.smu.bin
Displays the image version on the device.show version
Example:
Step 8
Device# show version
Displays information about the installation
status of packages. The output of this command
show install summary
Example:
Step 9
varies according to the install commands that
are configured.
Device# show install summary
Configuration Examples for Software Maintenance Upgrade
The following is a list of SMU configuration examples.
Example: Managing an SMU
• The examples used in this section are of hot patching SMU.
Note
The following example shows how to copy an SMU file to flash:
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
274
Software Maintenance Upgrade
Configuration Examples for Software Maintenance Upgrade

Cisco Catalyst 9500 Specifications

General

Brand	Cisco
Model	Catalyst 9500
Category	Switch
Language	English