Cisco Catalyst 9500 User Manual

DescriptionCharacter
Protocol unreachable.P
Source quench.Q
Port unreachable.U
To end a trace in progress, enter the escape sequence (Ctrl-^ X by default). Simultaneously press and release
the Ctrl, Shift, and 6 keys and then press the X key.
Additional References for Troubleshooting Software
Configuration
Related Documents
Document TitleRelated Topic
Command Reference (Catalyst
9500 Series Switches)
For complete syntax and usage information for the commands used in
this chapter.
Feature History for Troubleshooting Software Configuration
This table provides release and related information for features explained in this module.
These features are available on all releases subsequent to the one they were introduced in, unless noted
otherwise.
Feature InformationFeatureRelease
Troubleshooting software configuration describes
how to identify and resolve software problems
related to the Cisco IOS software on the switch.
Support for this feature was introduced only on the
C9500-12Q, C9500-16X, C9500-24Q, C9500-40X
models of the Cisco Catalyst 9500 Series Switches.
Troubleshooting
Software Configuration
Cisco IOS XE Everest 16.5.1a
Support for this feature was introduced only on the
C9500-32C, C9500-32QC, C9500-48Y4C, and
C9500-24Y4C models of the Cisco Catalyst 9500
Series Switches.
Troubleshooting
Software Configuration
Cisco IOS XE Fuji 16.8.1a
Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn.
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
343
Troubleshooting the Software Configuration
Additional References for Troubleshooting Software Configuration

Cisco Catalyst 9500 Specifications

General

Brand	Cisco
Model	Catalyst 9500
Category	Switch
Language	English