Cisco IE-5000 User Manual

116
Performing Switch Administration
How to Perform Switch Administration
Configuring MAC Address Change Notification Traps
Command Purpose
1. configure terminal Enters global configuration mode.
2. snmp-server host host-addr {traps | informs} {version {1 |
2c | 3}} community-string notification-type
Specifies the recipient of the trap message.
 host-addr—Specifies the name or address of the
NMS.
 traps (the default)—Sends SNMP traps to the
host.
 informs—Sends SNMP informs to the host.
 Specifies the SNMP version to support. Version
1, the default, is not available with informs.
 community-string—Specifies the string to send
with the notification operation. You can set this
string by using the snmp-server host
command, but we recommend that you define
this string by using the snmp-server
community command before using the
snmp-server host command.
 notification-type—Uses the mac-notification
keyword.
3. snmp-server enable traps mac-notification change Enables the switch to send MAC address change
notification traps to the NMS.
4. mac address-table notification change Enables the MAC address change notification
feature.
5. mac address-table notification change [interval value]
[history-size value]
Enters the trap interval time and the history table
size.
 (Optional) interval value—Specifies the
notification trap interval in seconds between
each set of traps that are generated to the NMS.
The range is 0 to 2147483647 seconds; the
default is 1 second.
 (Optional) history-size value—Specifies the
maximum number of entries in the MAC
notification history table. The range is 0 to 500;
the default is 1.
6. interface interface-id Enters interface configuration mode, and specifies
the Layer 2 interface on which to enable the SNMP
MAC address notification trap.
7.
snmp trap mac-notification change {added | removed} Enables the MAC address change notification trap
on the interface.
 Enables the trap when a MAC address is added
on this interface.
 Enables the trap when a MAC address is
removed from this interface.
8. end Returns to privileged EXEC mode.

Cisco IE-5000 Specifications

General

Brand	Cisco
Model	IE-5000
Category	Switch
Language	English