Cisco IE-5000 User Manual

790
Configuring Embedded Event Manager
Information About Embedded Event Manager
Figure 96 Embedded Event Manager Core Event Detectors
See EEM Configuration for Cisco Integrated Services Router Platforms Guide for examples of EEM deployment.
This section includes the following topics:
 Event Detectors, page 790
 Embedded Event Manager Actions, page 791
 Embedded Event Manager Policies, page 792
 Embedded Event Manager Environment Variables, page 792
 EEM 3.2, page 792
Event Detectors
EEM software programs known as event detectors determine when an EEM event occurs. Event detectors are separate
systems that provide an interface between the agent being monitored, for example SNMP, and the EEM polices where
an action can be implemented.
EEM allows these event detectors:
 Application-specific event detector—Allows any EEM policy to publish an event.
 IOS CLI event detector—Generates policies based on the commands entered through the CLI.
 Generic Online Diagnostics (GOLD) event detector—Publishes an event when a GOLD failure event is detected on a
specified card and subcard.
 Counter event detector—Publishes an event when a named counter crosses a specified threshold.
127574
Cisco
IOS
parser
text
Syslog
message
queue
OIR
events
EMBEDDED EVENT MANAGER SERVER
event
manager run
CLI command
Hardware
timers
Timer
event
detector
CLI
event
detector
SYSLOG
event
detector
OIR
event
detector
NONE
event
detector
Counter
event
detector
EEM POLICY DIRECTOR
Subscribes to receive events
and implements policy actions
EEM APPLET
EEM SCRIPT
Event
subscribers
Core event publishers

Cisco IE-5000 Specifications

General

Brand	Cisco
Model	IE-5000
Category	Switch
Language	English