Cisco IE-5000 User Manual

489
Configuring LLDP, LLDP-MED, and Wired Location Service
Information About LLDP, LLDP-MED, and Wired Location Service
 MAC address specified in the client MAC address
 IP address specified in port connection
 802.1X username if applicable
 Device category is specified as a wired station
 State is specified as new
 Serial number, UDI
 Model number
 Time in seconds since the switch detected the association
Depending on the device capabilities, the switch obtains this client information at link down:
 Slot and port that was disconnected
 MAC address
 IP address
 802.1X username if applicable
 Device category is specified as a wired station
 State is specified as delete
 Serial number, UDI
 Time in seconds since the switch detected the disassociation
When the switch shuts down, it sends an attachment notification with the state delete and the IP address before closing
the NMSP connection to the MSE. The MSE interprets this notification as disassociation for all the wired clients
associated with the switch.
If you change a location address on the switch, the switch sends an NMSP location notification message that identifies
the affected ports and the changed address information.

Cisco IE-5000 Specifications

General

Brand	Cisco
Model	IE-5000
Category	Switch
Language	English