Cisco UCS C240 M5 Service Manual

Installing the Cable Management Arm (Optional)
The cable management arm (CMA) is reversible left-to-right. To reverse the CMA, see Reversing the
Cable Management Arm (Optional), on page 20 before installation.
Note
Step 1
With the server pushed fully into the rack, slide the CMA tab of the CMA arm that is farthest from the server onto the
end of the stationary slide rail that is attached to the rack post. Slide the tab over the end of the rail until it clicks and
locks.
Figure 9: Attaching the CMA to the Rear Ends of the Slide Rails
CMA tab on width-adjustment slider attaches to end
of stationary outer slide rail.
3CMA tab on arm farthest from server attaches to
end of stationary outer slide rail.
1
Rear of server4CMA tab on arm closest to the server attaches to
end of inner slide rail attached to server.
2
Cisco UCS C240 M5 Server Installation and Service Guide
19
Installing the Server
Installing the Cable Management Arm (Optional)

Cisco UCS C240 M5 Specifications

General

Brand	Cisco
Model	UCS C240 M5
Category	Server
Language	English