Crestron CP4-R User Manual

130 • Crestron Pyng OS 2 for CP4-R Product Manual – DOC. 8432A
Software Update
Tap Check For Updates on the Installer Settings screen to display the Software Update
screen.
Software Update Screen
Use the Software Update screen to check for and download software updates for the
Crestron Pyng system and for connected devices. System updates must be initiated
manually.
The system scans the cloud for software updates and shows a pop-up notification on the
user interface and setup pages when an update is available. Software downloads may
be initiated from this notification or from the
Software Update screen.
Tap Download Update to update the system software if an update is available. Once
the software downloads, tap
Update Software to begin the software update.
NOTE: A software update takes up to 30 minutes to complete, and the CP4-R reboots
several times throughout the update process. Therefore, updates should be performed
when the system is not in use.
If a software update is available, tap the information button to view release notes
for the update.
Tap Check For New Software to scan the cloud manually for software updates.
Tap Check For Device Updates to discover and install firmware updates for network
devices paired with the system. The
Device Firmware Update screen is displayed.

Crestron CP4-R Specifications

General

Brand	Crestron
Model	CP4-R
Category	Controller
Language	English