Product Manual – DOC. 8432A Crestron Pyng OS 2 for CP4-R • 1
Crestron Pyng® OS 2 for CP4-R
Introduction
The Crestron Pyng® OS 2 for the CP4-R control processor is used to configure and
control audio/video systems, lighting, shades, thermostats, door locks, and security
systems for the entire home. Home devices are configured by using the free Crestron
Pyng home automation app on an Apple® iPad® device and controlled via iPad devices,
iPhone® devices, and iPod touch® devices. A Crestron® touch screen
1
that is connected to
the Crestron Pyng system provides instant connectivity and control for the entire
system.
Use the app to listen to music in any room, or share audio and video sources throughout
rooms and trigger environmental scenes within the Crestron Pyng network. The Crestron
Pyng app raises or lowers the lights, sets the thermostat to an ideal temperature, and
tunes in the media system to a favorite streaming service, all with the touch of a button.
Crestron Pyng is designed to integrate with every Crestron system. The onboard ports
on the CP4-R can be used to set up media, lights, shades, thermostats, and locks in
minutes. Then, program the rest of the devices in the system for a customized
experience that may be adjusted easily by the homeowner.
For a general overview of the Crestron Pyng system, including supported devices,
frequently asked questions, multimedia content, and tips and tricks, refer to OLH
article 257 at https://support.crestron.com/app/answers/detail/a_id/257/kw/257
.
NOTE: This version of the Crestron Pyng operating system is not available on the
PYNG-HUB. The features described in this document are available on the CP3-R and
CP4-R only.
1
Compatible touch screen models include the TSW-560, TSW-760, TSW-1060, and TSW-560P.
To Next Page
Loading...
Need help?
General
