Crestron CP4-R User Manual

180 • Crestron Pyng OS 2 for CP4-R Product Manual – DOC. 8432A
Use the Cameras screen to view and control all of the cameras configured for the
Crestron Pyng system. The selected camera feed is shown in the bottom right portion of
the screen.
If multiple cameras are configured for the Crestron Pyng system, use the dropdown
menu on the top left of the screen to select a camera to view.
The following camera controls are provided:
• Tap any of the Direction arrows to change the camera view direction (if
supported by the camera).
• Tap the plus (+) or minus (-) buttons under Zoom to have the camera zoom in or
out, respectively (if supported by the camera).
• Tap the camera feed to view it in full screen mode. Tap the camera feed again to
return it to its normal size.
Tap Home in the user menu to return to the Home screen.
Door Stations
If a TSW-x60 series touch screen has been added to the Crestron Pyng system and is
running the Crestron Pyng user project, the touch screen may be connected to a
2N® door station to provide a door station solution for the system.
For more information on integrating a 2N door station with Crestron Pyng, refer to
"Appendix H: Connect to a 2N Door Station" on page 244.
When the touch screen receives a call from the door station, an incoming call window
opens on the touch screen with the door station name and the camera feed.
Incoming Call Window
• Tap the green phone button to answer the call.
• Tap the red phone button to decline the call.

Crestron CP4-R Specifications

General

Brand	Crestron
Model	CP4-R
Category	Controller
Language	English