Crestron CP4-R User Manual

72 • Crestron Pyng OS 2 for CP4-R Product Manual – DOC. 8432A
Actions & Events
Tap the Customize Actions & Events button on the Configuration screen or the Actions
& Events button on the setup menu to display the
Actions & Events screen.
Actions & Events Screen
Use the Actions & Events screen to configure the behavior of remotes and keypads,
occupancy sensors, door locks, security systems, remote system events, media zone
events, and quick actions.
Scenes and other actions may be programmed to occur when a button is pressed or a
system event is triggered.
NOTE: The same basic configuration settings are provided for each item, although some
settings are added or removed for different device types and models. Refer to the
following sections for specific information on each configurable device.
To select an item for configuration:
1. Select the room that contains the item from the Select a Room menu.
2. Select the item to configure from the Select an Item menu. A configuration
screen for the device is displayed.
Tap the back arrow button to return to the Configuration screen.

Crestron CP4-R Specifications

General

Brand	Crestron
Model	CP4-R
Category	Controller
Language	English