Crestron CP4-R User Manual

206 • Crestron Pyng OS 2 for CP4-R Product Manual – DOC. 8432A
Speaker Pairs
In the Sonos app, it is possible to pair two PLAY:1, PLAY:3, PLAY:5, or CONNECT:AMP
speaker devices. When two of these speakers are paired, both speakers act as a single
Sonos device in the Sonos app.
When a speaker pair is created in the Sonos app, the user is asked to assign one of the
paired speakers as the left speaker. The speaker assigned as the left speaker becomes
the master, and, from that point forward, is used to represent both speakers in the pair.
The speaker pair is named after the speaker that was used to start the speaker pair
configuration. If this speaker is not chosen as the left (master) speaker, the left speaker
is renamed automatically.
In the following images, "Speaker1" in the Dining Room and "Speaker2" in the Entrance
will be used to create a speaker pair.
Pair Devices Screen - Sonos (Speaker1)

Crestron CP4-R Specifications

General

Brand	Crestron
Model	CP4-R
Category	Controller
Language	English